HM30 Combo kit
HM30 Combo kit
HM30 Air Unit AU for a remote device (e.g. Unmanned Vehicle)
Environment of the HM30

HM30 Fly More Combo

€804.00

The HM30 is sold as a combo kit including the Ground Unit (GU) + Air Unit (AU) with standard omni directional antennas as well as two directional antennas for the GU for longer distances.

This set includes one IP camera (1080@50fps) and cabling for all the interfaces. The kit also includes a battery and charger for the GU.

The HM30 set (GU+AU) have CE and FCC certificates

Description

The setup of a HM30 system is simple and will run in a minute or two. Install the antennas, connect the wiring, apply power, bind the Air Unit with the Ground Unit and you are all set to go.

  • On the side of the Air Unit, optionally you can connect an IP camera (comes with the kit) and/or connect your onboard computer with a Telemetry port (MAVlink), set the right baud rate, power up and on the air side you are finished. Please note; install the right voltage to power the Air Unit. Recommended a 4S LiPo battery with XT30 connector.
  • On the Ground Unit, there are various options to connect your Ground Control Station or Video Display Device. The video stream is available via the RTSP protocol. For a computer, tablet or phone, the video stream can be accessed either via the internal WiFi port of the HM30 Ground Unit, this is short range, or install an external USB WiFi adapter on in the USB-C port of the GU for a longer range. The LAN port can also be used to access the video stream as well. For the Android OS, there is a FPV app available to download for an integrated view of one video stream with the Telemetry Data as overlay.
  • For the MAVlink Telemetry, this can be accessed via the LAN as UDP stream or Bluetooth as COMx port.
  • Only one Ground Unit can be bound to an Air Unit but multiple Air Units can be bound to one Ground Unit.
  • To have two Ground Units on one Air Unit, please see the Dual Combo product.

Technical information

Weight 1.050 kg
Dimensions 22 × 16 × 7 cm
Overall

Model: HM30
Max Transmission Range: 30 kilometers (unobstructed, free of interference)
Channels: 16 communication channels
Compatible Flight Controllers:
– Pixhawk Based Flight Controller or APM
– SN-L+ Fixed Wing Flight Controller
– MATEK H743 / F405
or any flight controllers with UART datalink output
Compatible Android GCS (standard RTSP video stream):
– SIYI FPV
– QGroundControl
Compatible Windows GCS (standard RTSP video stream):
– QGroundControl
– Mission Planner
Ground Unit

Monitor Display: 0.96-inch OLED Screen
Dimensions (antennas and battery excluded): 109 x 61 x 28 mm
Weight (antenna and battery excluded): 132 g
Compatible Battery Type:
– NP-F550 / F750 / F770 / F950 / F970 series quick release batteries
(HM30 Fly More Combo comes with NP-F750 battery)
Fast Charging Protocol: PD 30W
Antenna Gain:
– Standard Omni Antennas: 5 dBi
– Standard Long Range Antennas: 11 dBi
Power Consumption: 5 W
Interface & Ports:
– S.Bus / PPM RC Signal Input: RC (GH1.25 4-Pin)
– Datalink Output: UART (GH1.25 4-Pin)
– Ethernet Port: LAN (GH1.25 4-Pin)
– Power Output: VCC (GH1.25 4-Pin)
– USB Video Output / Charging / Firmware Upgrade / USB WiFi: Type-C
– Power Input: PWR (XT30)
– Tripod Connector: 1/4-inch Screw Hole
Connection protocols:
– Bluetooth
– Internal WiFi (for short range connection)
– External WiFi on the USB-C port
Waterproof Level: IP53
Working Temperature: -10 to 50℃
Air Unit

Signal Output: 16 channels of S.BUS, 5 channels of PWM
Interface & Ports:
– SBUS: 3-Pin
– Datalink (to FC): UART 4-Pin
– PWM Channel 1 to 5: 6-Pin
– Video Input: Ethernet 8-Pin
– Firmware Upgrade: Type-C
Dimensions (antenna excluded, fan included): 70 x 55 x 16 mm
Weight (antenna excluded): 74 g
Antenna Gain (standard omni): 5 dBi
Power Input: 11 to 16.8 V (expandable to 4S to 18S with BEC)
Working Temperature: -10 to 50℃
FPV Camera

Frame & Bitrate: 720p 30fps 1.57Mbps H.265 (or 1080p 30fps 2.3 Mbps H.265 only as the reference to DIY configuration)
Sensor: 1/2.9" CMOS
Effective Reolution: 3 MP
Lens: 3.2 mm, F/2.8
Camera Angle: FOV 105°
Dimensions: 42 x 42 x 25 mm
Weight: 23 g
Cable Lens: 1000 mm
Working Temperature: -10 to 55℃

HM30 User Manual

Download

Version 1.3 of the HM30) User Manual