FULL HD, LONG RANGE, DIGITAL IMAGE TRANSMISSION SYSTEM
The HM30 system is a transmitter/receiver radio system. It transports (dual) IP video streams – with a Low Latency of 125ms – over the air. Used for Unmanned Vehicles. Combined with the MAVink Telemetry data and MAVlink Command and Control, makes it a perfect long range (up to 30Km VLOS) communication system.
The system consists of an Air Unit (AU) and Ground Unit (GU) with various connection interfaces. The AU can connect up to two IP cameras with the Dual Camera module. If one of these cameras is mounted on a gimbal, the gimbal can be controlled by a PWM signal on the AU.
In case a camera has only a HDMI output, there is a converter available, HDMI->IP, to integrate it into the IP transmission stream. The cameras are reachable via standard RTSP IP-addresses on GU.
The IP Ethernet port can also be used to transmit any data between the Air and Ground Unit by connecting an IP device (like Raspberry or ESP32) to your local created Ethernet network.
The GU is the video and telemetry receiver of the system. The transmission capabilities of the GU can be used for Command and Control and has various interface connections like PPM/S.Bus/PWM, UART serial port, IP Ethernet and USB-C ports.
The AU must be powered by a 11-16,8V source (4S-14S) controlled with a power management unit.
The GU can be powered by its own battery or a 7-16,8V external source.
The products:
-
HM30 Fly More Combo
The HM30 is sold as a combo kit including the Ground Unit (GU) + Air Unit (AU) with standard omni directional antennas as well as two directional antennas for the GU for longer distances.
This set includes one IP camera (1080@50fps) and cabling for all the interfaces. The kit also includes a battery and charger for the GU.
The HM30 set (GU+AU) have CE and FCC certificates
-
HM30 Dual Remote Control Combo Kit
The HM30 is also sold as a Dual Combo Kit including two Ground Units (GU) + one Air Unit (AU) with standard omni directional antennas as well as two directional antennas for the GU for longer distances. The Dual Ground Units are able to bind to the same Air Unit.
This set includes one IP camera (1080@50fps) and cabling for all the interfaces. The kit also includes a batteries and chargers for the GUs.
-
IP->HDMI Converter. Module for Ground Unit
This module converts an RTSP video stream to an HDMI output to connect a HDMI monitor directly to the HM30 Ground Unit
-
Dual Camera Module for HM30
This module, when connected to the Air Unit, gives the option of connecting two IP cameras.
The cameras are simultaneously accessible via rtsp streams from the Ground Unit.
-
HDMI->IP Converter for the Air Unit
Convert the signal of a camera with HDMI Output to IP video stream. To be connected to the Air Unit
The video stream is accessible on the Ground Unit as IP Stream with the RTSP protocol
-
HM30 Air Unit
Single Air Unit